This voltage converter detects if 230 V mains voltage is present as input voltage and switches between battery and mains voltage. If 230 V is present as input voltage, your battery will be recharged by the integrated 15 A charger. The separate „Charger“ switch must be turned on to charge the battery when mains voltage is applied.
Compatible with all batteries (rechargeable) from 150 Ah at 1500 Watts and 14.4V charging voltage
Scope of delivery: converter, power cable, wired remote control
- UPS - Uninterruptible Power Supply
- Switchover time < 25 ms
- pure sine wave voltage
- Soft start function
- 2 x Schuko socket
- Average power consumption in standby mode: 0 watts
- Reverse polarity protection for battery (fuse blows)
- Automatic shutdown in case of overload or short circuit
- Approved for operation in motor vehicles
- Stable housing made of aluminum and sheet metal
- Certifications: Converter, CE, RoHS; E8 Manufacturing according to DIN ISO 9001:2000
Please note that the inverter has a performance-dependent control for the fans. This means that the internal fans run from approximately 10% of the continuous output.
If you connect a consumer to the inverter that remains below 10%, the fans will not start either.
The inverter completely shuts down at an internally measured temperature of approximately 60°C.
| Weight: | 5 kg |
| Dimensions: | 15.75 in x 10.04 in x 4.13 in |
| Output voltage: | 230 V (50 Hz) |
| Top performance | 3000 W continuous. 20 ms for inrush or cold currents |
| Outlet | 2 Schuko sockets |
| Continuous performance | 1500 W |
| Installing a wired remote control: | Is it possible to order converters with a remote control, please? Retrofitting is only possible by sending in the converter. |
| Input voltage | 12 V |
| Undervoltage lockout | Below 10.4 V |
| Undervoltage alarm: | < 10.6 V |
| Overcurrent shutdown | 15.0 V |
| Overheating protection shutdown | 60°C |
| Relative Humidity | < 60% |
| Charging current | max. 10 A |
| Efficiency | 85%(typically approx. 92% ) |
| average standby power consumption - no load: | Typically at >12.5 V approx. 13 W and at <11.5 V up to 35 W |
| Number of connecting cables: | 1x Plus and 1x Minus included |
| Connection cable cross-section: | 16 square millimeters |
| Connection cable length: | Approx. 50cm |
| Fan control | after about 10% of continuous operation |
| suitable battery types: | Lead-acid, gel, and AGM batteries (no LiFePO4 batteries) |
Note: This item is exclusively for the caravan/motorhome sector and therefore NOT VAT exempt!
Frequently used accessories:
|
PCS Remote Controller with Display |
PCS Remote Controller with Display |
![]() |
![]() |










Reviews
There are no reviews yet.